1. First thing is, connect from the wall out to the Line socket in the splitter.
2. Then from Phone socket in the splitter, you can connect a phone
3. The ADSL or Internet socket should be connected to the RJ11 port named “Line” in the modem.
4. Then connect the modem to the computer through Ethernet port.
6. For the user name and password type admin.
7. If you cannot login press the reset switch in the back of the modem. This will reset to the factory setting.
8. After logged in, click Advanced Setup> Click WAN.
9. Then click Add. For BSNL type the below settings.
Click next.
Click next
Type the username and password provided by BSNL, then type in the other settings and click next
After typing as above click next
Then save the settings and reboot the modem.
It should be connected now. Line and Data LED should be lit.
It should be connected now. Line and Data LED should be lit.
No comments:
Post a Comment